boost your hsdpa/hspa signal strength

im going to show how to up your poor signal strength

1st one is CANTENA

1.Find a can that is about 4 inches wide in diameter and about 6 inches long. You may be able to solder several cans together to meet the length requirements.

2. Use the table below to calculate how far you will drill the hole for placement of an N type Female Chassis-mount connector. One side is N-female for connecting the cable from your wireless equipment, and the other side has a small brass stub for soldering on wire. These can be found at electronics stores internet suppliers

3. Drill a hole in the can about 2 inches from the end of the can.

4 .Widen the hole to accommodate the adapter.

5. Place the adapter in the hole and secure to the can.

6.Attach a pigtail cable to the adapter (a pigtail is a wire that attaches the adapter to the  modem, note you must have a compatible modem to make this work).
(be careful if your modem haven't  external antena )

 

7.Attach pigtail to cantenna and your modem


8.Tape cantenna to tripod

9.Aim at source and adjust to get the best signal

http://www.youtube.com/watch?v=zwNZGuKzGWY

 this is how it works

you find how is your signal strength using hyper terminal using at+csq

or you can see your mobile partner software over your mouse on signal